Post by CRViper on Jul 2, 2016 17:17:55 GMT 8
Disclaimer:
This is a self made DIY guide. Individuals deciding to take on such mod shall do so at their own risk. As with any DIY mods, unfamiliarity with tools/processes can be dangerous and may cause damage / bodily harm.
Post should be constructed as theoretical advise only.
Difficulty: Moderate
These are the original sill plates
Step 1: Stripping the original sills...
Step 2: Tapping the power source
End product
Where to buy?
I bought my set here from Aliexpress for US$62/pair.
Take note when buying, do not buy the set for the A6L bcos the dimensions are different from our local cars.
If want to customise, can follow this
There are plenty of designs to choose from, PM and talk to the seller and u can even get a discount.
This is a self made DIY guide. Individuals deciding to take on such mod shall do so at their own risk. As with any DIY mods, unfamiliarity with tools/processes can be dangerous and may cause damage / bodily harm.
Post should be constructed as theoretical advise only.
Difficulty: Moderate
These are the original sill plates
Step 1: Stripping the original sills...
 |  |
| Peeling off the original sills are simple, just use a pry tool to pry them off. (They are stuck down VERY tightly, dont be afraid to use brute strength here) | The hard part is to remove the residual 3M tapes. Using 3M adhesive remover like this will make life easier. Clean them off fully and clean the surface with rubbing alcohol will ensure the new sills bond nicely with the surface. |
Step 2: Tapping the power source
 |  |
| An easy method is to tap the Power source frm the footwell lights as it auto switch off when door is closed. Too much work needed to make it follow the courtesy door lights as it requires purchase of new wiring harness. | Just run the cable along the sides and under the door rubber seals. |
End product
Where to buy?
I bought my set here from Aliexpress for US$62/pair.
Take note when buying, do not buy the set for the A6L bcos the dimensions are different from our local cars.
If want to customise, can follow this
There are plenty of designs to choose from, PM and talk to the seller and u can even get a discount.
